Thursday, 7 February 2013

Rethreading a VSB door opener cord

Rethreading a VSB door opener cord

4 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. I have done this a dozen times. Now the door opens up very slowly. The motor turns a 1/2 turn then stops and restarts every 15 seconds opening the door very slowly. Is the circuit board bad or is there a simple repair?
    Thanks.
    Rodger Orman
    rodgerorman@yahoo.com

    ReplyDelete
  3. I have done this a dozen times. Now the door opens up very slowly. The motor turns a 1/2 turn then stops and restarts every 15 seconds opening the door very slowly. Is the circuit board bad or is there a simple repair?
    Thanks.
    Rodger Orman
    rodgerorman@yahoo.com

    ReplyDelete
    Replies
    1. I left the unit alone in the up position during the day and then retested it by simulating night by covering the sensor and the door closed. I then uncovered the light sensor and the door opened normally.
      Maybe it reset itself?

      Delete